Visonicom VRP125 WiFi repeater is a dual band 11AC 2T2R 1200Mbps wireless range extender which can easily increase the WiFi signal coverage of your wireless network for better WiFi connection in homes with many rooms or multiple floors. The Wi-Fi range extender has a built-in 110~240v to DC power adapter so that it can be plugged directly into an electrical outlet for convenient implementation.
The 802.11ac stylish WiFi repeater can also work as a router. The web GUI of the wireless range extender is simple to configure. The power switch of the Wi-Fi extender is convenient to power on/off when necessary.
The 802.11ac WiFi range extender also support mesh mode so that you can use it to set up a mesh network for seamless wireless connection.
This dual band WiFi Repeater is mainly used for providing free WiFi service in large area such as factory, community, street, home or etc. For example, the normal enhancer can expend distance up to 50~100 meters away. If there are more repeaters or more bigger power repeater, the range will be extended further; the WiFi extender simultaneously supports 2.4G and 5G WiFi network connection, and it can support 2.4G or 5G transmission speeds of up to 1200M. It has 2dBi Antennas providing even better wireless performance, transmission rates, stability technology automatically avoids channel conflicts using its channel selection feature.
Features
*Slide Switch: to shift working modes: Repeater, Router, Mesh
*Dual Band: 2.4GHz and 5GHz
*Supports web GUI management and TFTP upgrade
*Signal Indicator helps to find the right location to place the range extender
*Range Extender mode boosts wireless signal to previously unreachable or hard-to wire areas flawlessly
*Compact and wall-mounted design make it easy to deploy and move flexibly
*Provides 10/100Mbps Auto-negotiation Ethernet ports.
*WPS button allows users to set up instantly Smart
*Provides 3 work modes: Repeater mode, Router mode and Mesh Mode
*Encryption: 64/128 bits WEP; WPA/WPA2
*Easy Setup Assistant provides quick & hassle-free installation.
*WLAN access point/client according to IEEE 802.11ac/n/g/b.
Specifications:
Hardware Parameters | |
Chipset | RTL8197FH-VG4-cg +8812FR |
CPU Frequency | Single core 1GHz |
Memory | 64MB 16-bit DDR2 SDRAM |
Flash | 8MB |
WiFi | 2T2R 2.4GHz 802.11b/g/n, 300Mbps |
2T2R 5.8GHz 802.11AC, 867Mbps | |
Interface | 1*RJ45 10M/100M Ethernet Interfaces |
1*WPS/Reset Button | |
1*Slide Switch for 3 Working Modes Selection(Router/AP/Repeater) | |
1*Input 100-240V~50/60Hz | |
WiFi Antenna | 2*3dBi External 2.4G Antenna |
2*3dBi External 5.8G Antenna | |
WiFi Features | |
Standard | 802.11b/g/n/ac |
11N: 2.4~2.4835GHz | |
11AC: 5.150~5.825GHz | |
Korea, Japan, ETSI, FCC Channel Options | |
Modulation Schemes | OFDM: BPSK, QPSK, 16-QAM, 64-QAM 256-QAM |
DSSS: DBPSK, DQPSK, CCK | |
Transfer Rate | HT20: Up to 144 Mbps |
HT40: Up to 300 Mbps | |
VHT80: Up to 867Mbps | |
Software Features | |
General | RFC0768 UDP |
RFC0791 IP | |
RFC0792 ICMP | |
RFC0793 TCP | |
RFC0826 Ethernet ARP | |
RFC0894 IP over Ethernet | |
RFC0922 Broadcasting Internet Datagrams | |
RFC0950 Internet Standard Subnetting | |
IEEE802.3 Ethertype | |
IEEE 802.11b | |
IEEE 802.11g | |
IEEE 802.11n | |
RFC2516 PPP Over Ethernet (PPPoE) | |
RFC1662 PPP in HDLC-like Framing | |
RFC1332 PPP Internet Protocol Control Protocol | |
RFC1042 A standard for the Transmission of IP Datagrams over IEEE 802 Networks | |
IPoE (a.k.a IP over Ethernet over AAL5) | |
DHCP Server, Client | |
NAT, NAPT and ALG | |
DMZ and Port Forwarding (Virtual Server) | |
IGMP Proxy and MLD for IPTV | |
Logs and Statistics | |
Flexible and Secure SPI Firewall, Denial of Service (DoS) Protection | |
Port Filtering, IP Filtering and MAC Filtering | |
URL Filter | |
QOS Flow Control | |
DDNS | |
IPV6 | |
Static Route | |
SNTP Date/time Update from Internet Time Server | |
Web GUI | |
Wireless Site Survey | |
Wireless ACL | |
WPS | |
Separate Authentication for Each SSID | |
Wireless Schedule | |
802.11q vLAN | |
Ping Diagnostics and TraceRoute Diagnostics | |
Router/AP/Repeater Modes | |
Environment Requirement | |
Operating Temperature | 0°C~40°C |
Storage Temperature | -20°C ~ 90°C |
Operating Humidity | 5%~95% (typical) |
EMC/Safety | |
Regulation Compliance | CE |
Safety Regulations | UL |
Green Standard | RoHS |